Running in is to make the height of the tooth tip uniform, avoiding premature cutting and tilting of the tooth tip due to early edge breakage during cutting. A well run in saw blade has a service life that is at least 30% longer than an un run in one.

1. industrial pure iron, 10# steel, it is recommended to use 11C.2. intelligent high-speed sawing machine, 2/3 and 3/4 teeth are recommended to use 11C.3. ordinary sawing machine first choose 10C, alternative 07C.

The direction of the mounting teeth of the saw blade must be consistent with the direction of the sawing operation❶ Open the saw machine shield and loosen the saw blade tensioner. Hang the band saw blade onto the saw wheel

The cutting depth of a single tooth can be changed by the change of line speed, tooth pitch and cutting time. The cutting depth of a single tooth with the right cutting depth can avoid the early edge breakage wear of the tooth tip.

There are two main categories of band saw blades in the northern saw industry, which are bimetal band saw blades and cemented carbide band saw blades.1. Product features:The teeth have high hardness, high red hardness, and the back has high strength and toughness.

1.Selection of cutting width and tooth pitch:The size of the pitch is selected according to the effective sawing width (thickness) of the material.

Carbide band saw blade - Cutting parameters recommended reference table, please see more

The materials shown in this table are all 20HRC(225HB) as an example. When the hardness of the material is 30HRC (283HB), the speed is adjusted to 70% of the table. When the hardness is 35HRC (330HR), the speed is adjusted to 60% of this table.

SAWTX-SD hollow parts, thin wall parts, suitable for all kinds of pipe, including round pipe, square pipe, shaped pipe

Ordinary sawing machine low carbon steel and low alloy steel ☆ Light wood, copper alloy, aluminum alloy, general carbon steel ○ castings, forgings, alloy steel