Shear band sawing machine V6-GB4025

1. Main parameters of machine tool

2. Accuracy

A. saw cutting surface vertical mm: 0.20/100

B. length repeated positioning accuracy mm: 0.30

3. Basic characteristics and configuration of machine tools:

A. Machine structure: horizontal semi-automatic.

B. it can realize the hydraulic tightening up and down at the same time, and can be sawed into bundles. (The upper pressing device is not in the standard configuration, and customers can purchase it separately according to their needs).

C. operation mode: manual/automatic, all use button operation, convenient and simple.

D. The saw blade guide device combined with rolling bearing and cemented carbide and spring positioning can extend the service life of the saw blade.

E. saw blade feed speed, hydraulic stepless speed regulation.

F. closed large fuel tank, suitable for continuous 24 hours of work system does not heat.

G. Worm gear and worm drive.

H. random feeding rack and trailer.

I. After a long time of use, it can still be restored to high precision by adjustment.

J. all the structural parts vibration aging, to maximize the elimination of residual stress, to prevent machine deformation.

K. parts shot blasting treatment, enhance the adhesion of the paint film, increase the strength and rigidity of the machine tool.

4. Service commitment:

a) Understand the production and processing needs of users before sales, provide users with band sawing machine products with reasonable performance and price, provide timely and accurate technical help to users when necessary, and make necessary explanations on technical documents, drawings, instructions for use, equipment performance, analysis methods, etc.;

b) Train operators and maintenance personnel on equipment operation, maintenance, analysis and inspection after product delivery;

c) If the product fails during use, reply in time after receiving the user's maintenance notice or send service personnel within 24 hours;

d) To ensure long-term provision of maintenance spare parts for outgoing products.

5. Ordering Instructions:

a) By default, the sawing machine does not include the upper clamping set (clamping device for bundle cutting), which can be purchased separately on request.

b) If the actual cutting range will be smaller after ordering the upper pressing device, please communicate with the sales staff in advance according to the actual use.

c) The installation and commissioning of free equipment is only limited to the surrounding areas of Hebei, and some fees will be charged for commissioning in other areas. The specific fees will be negotiated depending on the distance.